Room All-In-One Playard: Changing Table and Bassinet Setup

By Joovy | Published: 2026-10-25

Category: How-to Guides

Learn how to set up the Joovy Room All-In-One Playard as a bassinet and changing table. Step-by-step guide for a safe, portable nursery center.

Quick Answer

Set up the Joovy Room All-In-One Playard as a bassinet and changing table by following the frame assembly, bassinet attachment, and changing station placement in order. The key is locking all clips and ensuring the mattress pad is flat before use.

Why the Setup Order Matters

The Joovy Room Playard combines three functions in one frame, so the assembly sequence affects stability. If you attach the changing table before the bassinet is locked, the frame may shift. Always complete the bassinet step first to create a solid base for the changing station.

Common Setup Mistakes to Avoid

A frequent error is leaving the bassinet support straps loose, which causes the mattress to sag. Another is forgetting to click the changing table brackets fully into the frame—the table can tilt under weight. Check each lock twice before placing your baby on any surface.

Step-by-Step Setup Guide

1. Unfold and Lock the Frame: Place the playard on a flat, clean surface. Pull the frame outward until it clicks into its locked position. Push down on the center of the floor to ensure it is fully flat. If the frame does not click, the legs may not be fully extended. Do not force it—recheck each leg joint.
2. Attach the Bassinet: Locate the bassinet fabric and hook the support straps over the top rails on each side. Snap the clips onto the frame. Place the bassinet mattress pad inside, flat side up. The mattress pad must lie completely flat with no wrinkles. A wrinkled surface can create an unsafe sleep angle for newborns.
3. Install the Changing Table: Slide the changing table brackets onto the top rails near the short side of the playard. Push down until you hear a click. Secure the safety strap around the changing pad. Test the table by pressing down firmly—if it wobbles, the brackets are not fully seated. Remove and reattach until stable.
4. Organize Storage Pockets: Attach the storage organizer to the side of the playard using the provided hooks. Place diapers, wipes, and toys in the pockets for easy access during changes. Do not overload one pocket; distribute weight evenly to prevent the organizer from sagging or detaching.
5. Final Safety Check: Verify that all clips, straps, and brackets are locked. Shake the frame gently to confirm no parts are loose. Ensure the changing table and bassinet are at the same height and level. Always perform this check before placing your baby in the bassinet or on the changing table. Recheck after moving the playard to a new location.

Product Facts

Room All-In-One Playard Nursery Center Changing Table Bassinet: The Room All-In-One Playard includes a waterproof playard, bassinet, and changing table with storage for diapers, wipes, and toys. The waterproof material makes cleaning spills easy, and the built-in storage keeps essentials within reach during diaper changes.
Room All-In-One Playard Nursery Center Changing Table Bassinet